Good info bellow, However if you're using system II without a design just keep in mind that you don't hit it below 10.5 on the input. Or your just amplifing noise.
>The sys II amplifier high gain dual has a station gain of 40 dB if you are running it manual 38 dB in thermal with a 9dB interstage EQ [keep this turned up to 9dB] and 35 dB gain in AGC, the output is dependent on the performance you are trying to acheive check with system design spec.The internal tilt of this amplifier is 6.8dB[ +/- .5] The AGC pilot is 445 MHz or ch. 61 you pad the AGC to 29 dB on channel 61.Hoipe this helps.
>
>>Any one know what level you are supposed to run these S.A. system amp 2 out at on the high end. If it makes any difference these are system amp 2 dual, it has 2 feeder legs..
>>any idea what these feeder legs run out at also
>>Thanks for your help
Re:need help with S.A. system amp 2
Member #: 9833
Registered: 1996-2001
Posted:
12
Name:
Tom Johnson
Name:
Tom Johnson
Company:
Contractor
Occupation:
Sweep & Fiber tech
Location:
USA
Personal:
early 60s
Experience:
~45 years
There is 1 reply to this message
