The sys II amplifier high gain dual has a station gain of 40 dB if you are running it manual 38 dB in thermal with a 9dB interstage EQ [keep this turned up to 9dB] and 35 dB gain in AGC, the output is dependent on the performance you are trying to acheive check with system design spec.The internal tilt of this amplifier is 6.8dB[ +/- .5] The AGC pilot is 445 MHz or ch. 61 you pad the AGC to 29 dB on channel 61.Hoipe this helps.
>Any one know what level you are supposed to run these S.A. system amp 2 out at on the high end. If it makes any difference these are system amp 2 dual, it has 2 feeder legs..
>any idea what these feeder legs run out at also
>Thanks for your help
Re:need help with S.A. system amp 2
There is 1 reply to this message
