Well let's see Cable Splicing... 1st you have to have 2 cables that are compatible.. or you have to get a gender changer, Then you Strip.. that is unless you have a self stripper tool, Now comes the FUN Part.. You Core it.. and low and behold you end up with a little 1" dong.. then you have to take the Y90.. She is like the vise's of all vise's .. she takes that little 1" dong and strips all that protection off of it, now comes the the part that you need to make sure that it don't get any contaminants on your 1" dong.. You need to check to be sure that the female receptor has plenty of lubricant inside of her Glory Spot.. this also prevents contamination, but before you insert your 1" dong into the female receptor you need to place a 7" cover or unless you are super extended a 12" cover..
That protects you both from the elements, now you grab your nuts and work them loose.. after a moment they will be able to fully fit into the female receptor.
once the 1" dong has become acquainted with the female receptor and has truly hit bottom and came to a abrupt stop and is sitting happy and waiting..
Now comes the Nut Twister.. Dang I love this part.. you crank then nuts down so tight you can hear them go eek.. but you have to be gripping the female receptor at the same time with the nut gripper.. or you will end up with a suck out.. and that is bad.. but if you hit bottom and grip her real good and hear your nuts go eek
chances are she won't suck out on you.. and to finish it all off, you slide the cover over the both of you and provide some heat and as most things that are complete they will shrink and they are done.. Goodnight Lucy..
and that is how you splice cable
Re: Cable splicing?
Member #: 62417
Registered: 10/5/2008
Posted:
1460
Occupation:
Semi-Retired
Location:
Where ever the lights turn off at Night
Personal:
mid 70s
Experience:
~52 years
There are 3 replies to this message
