Create your free account now! Sign up

Re: Info

Vegassatellite, I disagree. Each of the outputs from the DishPro Plus Twin will bandstack the 110 and 119, further, the seperater will also bandstack the 110 and the 119 on the other side of the seperater twice. A 322 needs a bandstacked 110 and 119 for each input (room one and two) there's the proof. Also a Dish Pro 34 switch will not be compatable at all with the DishPro PLUS equipment. You must use PLUS componants. Yes a DishPro PLUS 44 switch will work but not a DP 34. Your problem with the 522-811-311 install was the 811. That being a High Definition receiver there lies the problem. The 811's software is a whole other beast.
Two 322's are fine or a 322 and two 311's fine. Four 311's fine, however using the seperaters for two 311's requires alot of extra hassle cabling because the seperater winds up in only one room and then it's like running the second room leg from a 322 to the next room. In that situation it is better to leave the seperater outside the house and wrap the house using another wall penetration to the next 311.
This is CABL.com posting #165296. Tiny Link: cabl.co/mRae
Posted in reply to: Re: Info by vegassatellite
There is 1 reply to this message
Re: Info vegassatellite 4/8/2006 7:33:00 PM