Create your free account now! Sign up

Re: C-Cor naviCor 862 FlexNet 900 Series Node Info

You need trunk eqs. The part number is SPB-1000-3. You place them in the eq slot next to where the power pack plugs in. That will knock down the 2 bridger ports on the left side equally 3 db and the 2 bridger ports on the right will be 3 higher. I'm almost positive they make the SPB eq's for every denomination. We used SPB-1000-9's, because our trunks were @ 41/31 & feeder was 50/40. Another trick I used, if you only have one output on that particular bridger side, instead of using that little jumper to select between ports use a three pad. That will also knock that port down. Hope this helps.
This is CABL.com posting #155747. Tiny Link: cabl.co/mOGd
Posted in reply to: C-Cor naviCor 862 FlexNet 900 Series Node Info. by Wolf1
There is 1 reply to this message
Re: C-Cor naviCor 862 FlexNet 900 Series Node Info cabledude 11/14/2005 6:33:00 PM