> This equipment is JUNK!!!!!!!!
> THE FIX IS PULL THE PORT CAP IF PLASITC IS BROKE REPLACE TAP.
>
> > THESE PIECE OF sh** TAPS HAVE A BIG PROBLEM THE PLACTIC THAT HOLDS THE PIN FITTING TO THE BUZZ BAR WILL BREAK IN HALF IF OVERTIGHTENED. WHEN THIS HAPPENS IT WILL CREATE CPD,ELECTRICIAL IMPULSE, AND INTERMITTANT NOISE.
> >
> > > Been having lots of intermitent problems(hum,intermod etc,) with 1ghz maspro telephony taps with 90 volt system.Was wondering if anyone out there has had same problems and your causes and cure. thanks
> > >
Re: maspro telephony taps
There are 0 replies to this message