I guess i'll throw my 2 cents in, this sounds like an RF short I had a similar issue. Someone said cold solder that is a real possability, I would look for a long pin connector or fitting problem. Also check to see if it is a backfeed problem maybe a bad TV
>
>
> > if is GI and its on the 3/4 leg change the mbsp
> >
> > > Got a pesky lil' problem with a leg of feeder. From time to time it loses lowband but not AC. When you pull and re-install a faceplate it resumes working properly. Have shot a couple spans with TDR and see no adverse traces. Since the problem goes away with the removal of a faceplate it's hard to track and it sometimes wont came back for months. Anyone here had experience with this and have good solution? I'm thinking that we might have to tear apart every connector and look for slightly short center conductor or broken pin and check all the seizure screws down the line as well which would be a real pain in the ass..
Re: intermittent short
There are 0 replies to this message