Well thats a pretty good deal then. But even with Sencore it lists for 1200 plus direct and 1100 from odd end dealers. I would hold on to that phone number. If you can get that model for 649.00 you should be able to go into business just reselling them. We paid well above a grand for one new last year. I just hope to get back a little of what I put in. I dont need a meter anymore. I appreciate the words though, perhaps I could lower the price a bit, but I hate to take too much a loss.
God Bless
> Uhhhhhh......I get those brand new from Sencore for 649.00 plus shipping. Sorry if you paid more.....I think you got ripped.
>
> > This is a two owner-meter, been used for only a year. In perfect condition and comes with case and strap. Asking 950.00 You wont find this meter for this price. Im leaving the cable business and will be posting many other items here shortly, including coring tools, power drills, etc.
> >
> > Description as follows:
> >
> > All channel/frequency tuning from 5 to 863 MHz including UHF and optional sub-band to meet your system testing needs now and in the future.
> >
> > Auto attenuation across the entire -35 dBmV to +60 dBmV measurement range enabling you to make measurements anywhere in your system.
> >
> > Easy-to-use, one button operation with a digital display of the key signal parameters (Video, Audio and non-intrusive Hum) you need for system testing without interpretation errors.
> >
> > Pre-programmed with Standard Cable channels, IRC, HRC, VHF, UHF channel plans or can be easily customized for your system testing needs.
> >
> > Hand-held, rugged and weather proof design makes the unit ready for any environment, plus the back-lit digital display lets you work in low light conditions.
> >
> > Smart power - over six hours of continuous use on a single charge, and up to 10 days with on and off use, and is fully recharged in less than three hours. It is designed to eliminate battery memory problems for years of reliable service.
> >
> > SL753D "CHANNELIZER"TM Condensed Specifications
> >
> > Tuning Range:
> > Channel Plans: FCC (std) HRC, IRC, VHF/UHF, PAL A,
> > PAL B/G, PAL I, Belgium, German, Israel, Japan, Cust. 1 & 2
> > Channel Step Size: 1 CH. (6 MHz)
> > Frequency:Step Size: 50 kHz
> > CATV Bands
> > Channels: 2 thru 127 (CH 1 in HRC & IRC)
> > Frequency: 50 thru 810 MHz
> > VHF/UHF Band:
> > Channels: 2 thru 69
> > Frequency: 50 thru 810 MHz
> > Sub-Band (optional): Channels T7 thru T13
> > Frequency: 5 thru 50 MHz
> > Tuning Accuracy: Channel & Freq. 10 PPM (± 10 kHz)
> > RF Input
> > Sensitivity: -35 dBmV
> > Input Impedance: 75 Ohm
> > Maximum RF Input : 100 VDC or 100 VRMS
> > Measurement Functions
> > Video Carrier Level:
> > Amplitude Resolution: 0.1 dB
> > Amplitude Accuracy:
> > CATV and VHF
> > ± .0.75 dB Flatness 5 to 750 MHz
> > ± 0.75 dB, Level Linearity -35 to +60 dBmV
> > Typical: 1.0 dB total
> > Temperature: All Bands ± 2.5 dB, 0 Deg. F to +120 Deg. F
> > Audio Carrier Level
> > Amplitude Resolution: 0.1 dB
> > Amplitude Accuracy:
> > CATV and UHF
> > ± 1.0 dB Flatness 5 to 750 MHz
> > ± 1.0 dB Level Linearity -35 to +60 dBmV
> > Typical ± 1.5 dB total
> > Hum Measurements
> > Measurement Range: 0.5 to 10.0 %
> > Measurement Accuracy: 0.5%; 1% after 5%
> > Power Requirements
> > 120 VAC, 12 VDC
> > Rechargeable Battery Life: 6 hrs. continuous
> > Charger: 14 V at 700 mA ( 12 V min, 17 V max)
> > Size
> > 10.2" H x 5.1" W x 2.4" D
> > Weight
> > <3.5 lbs.
> >
> > I will accept Paypal(http://www.paypal.com or money orders, or checks if overnighted and verified.
> >
> >
Re: Sencore SL753D Channelizer
There are 0 replies to this message
