Create your free account now! Sign up

Re: stripping 1/2" cable with tube cutters


in 1979 & 80, in new jersey, we spliced a whole lot of coax without coring tools. tube cutters to cut aluminum. carefully clean center conductor. then take torch and heat up end of aluminum so radiation sleeve slips into cable .this was approved by their engineer. talk about the good old days.

> You will need a coring tool to core but not to strip........You're welcome!!!
>
> > I see (wink) think i understand now... what i was getting at was if you actually needed a coring tool to strip the cable....for the odd time i do work with hardline (very seldom i ever work with anything over RG11 cable) was just wondering if i could get away with the tube cutters.
> > Thanks switchman, Theres some great people on the bar!!!(canada) (usa)(cool)
> >
> > > That takes a little more talent.....using the inside of your nines...where the handle comes together crush the dalectric down to the sheath .......carefully so you don't crush or distort the center conductor.....and twist it off. Then clean your center conductor using a plastic surface or an approved conductor cleaner. Core with a coring tool
> > >
> > > > Thanks for your reply, but what about coring out the dielectric from the cable? how did you do that or did you not have to?
> > > >
> > > > > Yes, it's true....in the old days that's all we had.
> > > > >
> > > > > > I dont have much experience working with hardline, but i have heard it is possible to strip 1/2 hardline with tubecutters and use a T&B K series connector or splice on it. Just out of curiosity was wondering if anyone might shed some light on this. Thanks in advance!!!
> > > > > >
> > > > > > S.Schnepel.(canada)(hatty)
This is CABL.com posting #77208. Tiny Link: cabl.co/mufs
Posted in reply to: Re: stripping 1/2" cable with tube cutters by switchman
There is 1 reply to this message
Re: stripping 1/2" cable with tube cutters IMACABLEGUY 8/1/2002 5:29:00 PM