It is an interstage pad. That should always start with a zero value. The pad at the input is to give you your minimum input eg. if you have a min input at 17 and you read a 19 you put in a 2 pad. After you get the correct tilt on the output with the eq you read the output if you have to much level, then you change the interstage pad to whatever you need to make the proper output levels. Any questions call me @ 770-513-3015.
>
>its an innerstage
>>I have heard dozens of "opinions" on how to set up SA II 750 gear. The people who really know are sweep techs here on CABL. Even SA tech support gives different answers.
>>The question: On the LE's at the forward EQ there is a pad. At the reverse EQ there is a pad. Is the other pad slot an interstage pad or a forward input pad? Same on the Amps, what is the pad at each leg?
>>Trial and error always gives a decent rough balance but splicers would like to set it up properly. Trouble is no one to tell us.
>>
Re:SA 750 question...help!
Member #: 7575
Registered: 1996-2001
Posted:
22
Name:
Mark D. Creath
Name:
Mark D. Creath
Company:
Shift Your Dish Inc.
There are 0 replies to this message
