Create your free account now! Sign up

Re:SA 750 question...help!

The other pad is an inner stage pad position. Depending on the LE, manual, thermal, or AGC, set up the input pad and EQ for a flat 12db to 15db depending on the system specs also. Place the pad value into the innerstage that will give you the output level you want.
Amplifiers such as the HGD, and the UBT are pretty close to the same. Pad and EQ the front end for a flat 15db, place a 4 or 5 pad into the output legs and place the pad value into the innerstage that gives the desired level. Sometimes you will have to change an output pad by 1 or 2 values to even up the levels on each leg.
SA cannot agree on anything. Don't get upset about that.

>I have heard dozens of "opinions" on how to set up SA II 750 gear. The people who really know are sweep techs here on CABL. Even SA tech support gives different answers.
>The question: On the LE's at the forward EQ there is a pad. At the reverse EQ there is a pad. Is the other pad slot an interstage pad or a forward input pad? Same on the Amps, what is the pad at each leg?
>Trial and error always gives a decent rough balance but splicers would like to set it up properly. Trouble is no one to tell us.
>
This is CABL.com posting #39840. Tiny Link: cabl.co/mkwK
There are 0 replies to this message