Create your free account now! Sign up

Re: Issues communicating w/SDA-5000's with QAM Opt


Kable,

If you had the old "S-S" cable it should work fine with both the QAM and non-QAM units. As a matter of fact, it should also work with the DSAM provided cable that goes between the SDA-5500/5510 and DSAM units but I can not confirm that, but it would make sense.

The older "S-S" cable was specifically wired to work to the Wavetek standards. Using a standard DB9-DB9 with a null modem just happened to work out on the older SDA, 3-SR and 4040 units but Wavetek always instructed their customers to use the factory supplied cable. With the QAM units this was mandatory.

As for the Stealthware 7.0 and 7.1, I have only worked with the 7.0 with Windows XP. I believe that the 7.1 was a verson that allowed Stealthware to work with Windows Vista but I can't remember exactly.

I do have a copy of Stealthware 7.0 if you need it. I'm always happy to help if I can! It's just good to see that sweep is still being used in the HFC networks!

Good luck!

Greg

This is CABL.com posting #380020. Tiny Link: cabl.co/mbK1w
Posted in reply to: Re: Issues communicating w/SDA-5000's with QAM Opt by KableGoddd
There are 0 replies to this message