They all should be 750's. found to be all 870's 40/52 The one at the head end has AGC and the one at the end of the line I think was thermal. They all look physcically the same but I have not actually looked at what is the real difference between the different amps I have seen onsite. All are 4 port
models using all 4 ports except the head end which looks to have been built for the line extender which was found unused from the original construction.
I think the longest run is around 600ft. .625 hardline between amps. Do we care about distances as long the levels look good? I'm going to walk the place and take a reading at the amp and at the taps and see what the levels are actually are.
Mike
Re: Gainmaker Fine Tuning + ETC
Member #: 99425
Registered: 10/26/2014
Posted:
14
Name:
Michael P. Fleming
Name:
Michael P. Fleming
Company:
Fleming Technical Enterprises
Occupation:
Technical Professional
Location:
Eastern Virginia
Personal:
mid 60s
Experience:
~42 years
There is 1 reply to this message
