i had some c-cor nodes that had several reverse transmitters that would raise the floor like what your saying, i 1st made sure the ground was good (make sure noone wacked it down by the ground and sold for scrap) bad ground at the node can make it go crazy,, then i changed out the revesrse transmitter, and my probs of intermittent floor jumping went away, so i had a couple bad optical trans which we changed out and reoptimize the reverse signal hitting hub, if that dont work, pull reverse pad at 1st actives out see if it drops out going that direction,, have fun
Re: Fighting impulse
There are 2 replies to this message