I dont think any questions are stupid. Anyone that comes to this forum and asks questions is a brother or a sister in cable and will likely be successful. On the other hand, folks that judge and insult come from a different place, who knows where they will end up.
Saying a four way splitter has a 7 db loss is to broad of a statement. At what frequency are you speaking of? Do you know the loss of 19mhz?
Lets be kind
J
>YOU CAN NOT GET 45 IN AND 45 OUT OF A 4 WAY. 4 WAY HAS 7DB LOSS...ITS NOT THE BRAND OF THE SPLITTER, ITS HOW MANY PORTS. YOU ARE LOSING TOO MUCH SIGNAL DOWNSTREAM AND UPSTREAM ON AN 8 WAY. ITS PECKIN AT YOU BECAUSE YOUA RE STUPID
>
>>I install a lot of cable modems. Have installed several kinds but the ones I'm havinf trouble with is the GI Surfboards. The cable modem is external and connects to an ethernet card.etc,etc,etc,
>>the problem is that when it is hooked to a four way splitter or eight way the modem becomes unstable or works intermittingly. I use primarily Regal Gold 120db EMI or Tru Spec 120dB EMI. The modem would work fine thru a 2way or three way but 4's and 8's would kill it. The RF being sent back was 19MHz and it measured 45db before the 4 ways and 45 dB out of the four way input. This was very strange and have no explanation for it.Has anyone come across this before or know why this happens. It is easily gone around to get it going again but the WHY is peckin at me. help if ya can. Thanks
>> (-REDACTED-)
Re:Return path Problem w/ Modems
Member #: 5886
Registered: 1996-2001
Posted:
13
Name:
Phil Phisical
Name:
Phil Phisical
Company:
Studs in Tubs
There is 1 reply to this message
