Create your free account now! Sign up

Re: dishnetwork uhf remote (tuner 2)

ok it requires two splitters and a few jumpers....  behind the receiver on tuner 2 put one jumper on tv output port  and one jumper on the uhf antenna port then connect the other ends to the out puts on one splitter then connect the coax going to the tv2 to the input on the splitter connected to the receiver.....   then go to the other tv that is running off that receiver tv2 (dont forget the antenna) connect the coax that is comming from the receiver to the input on the second splitter connect one jumper from the splitter output to the tv and screw the antenna to the last output on the splitter and bingo your in business!!!!!!!      even works if your back feeding through diplexers looks crazy but it works fine with no loss of sound or picture quality!!
This is CABL.com posting #267408. Tiny Link: cabl.co/mbhJc
Posted in reply to: Re: dishnetwork uhf remote (tuner 2) by primebusiness
There is 1 reply to this message
Re: dishnetwork uhf remote (tuner 2) Matt3046 8/28/2009 9:26:08 PM