I've been selling for manufacturers say 20 yrs, and now on my own as a small reseller distributor...So I'm not as "hands on" as you guys, but like to know a little about everything....
. I could use some advice today:
I've delivered Powerguard /Antec/APC 6015 power supplies, non standby. An 11x 8 x 8 inch cabinet comes with an integrated U shaped spine, and 2 , 5/8" holes. Does this model mount up simply with thru-bolts, or is there a bracket required ? There were no additional notches, holes, pins nor slots on the spine, so I assumed it was a simple "drill" and bolt up affair. The 3 battery standby's I sell, do have a removable bracket, this can be mounted first, is notched and bolted to meet the cabinet , but not so on this little guy. The Small Alpha is almost identical, except there are slots
cut into the "spline" piece. For what , can only guess.
PIctures easily availble, the FLM "book" makes no mention, shows only the bolts from the cabinet interior ......
Thanks for install advice
LIne Power 101
There are 3 replies to this message