Create your free account now! Sign up

Re: help

You need to start @ the lnb and work your way towards that switch, either you have a bad connector, bad lnb or bad switch. Possibly even some bad coax, but if you start @ the lnb checking for correct voltage and do the same until you hit that switch I bet you will find your problem.If your dish is peaked and getting 90's on the even transponders you would never get a 0 on the odd's, unless you had a problem. Hope this helps out.
This is CABL.com posting #168135. Tiny Link: cabl.co/mRT1
Posted in reply to: help by GROUNDBLOCK
There is 1 reply to this message
Re: help uboatcmdr 5/16/2006 10:55:00 AM