Create your free account now! Sign up

Re: d-10

haven't met a D-10 yet that I liked. I hate them. Crap crap crap.

Anyways. If you have truly replaced all cabling running from Dish to IRD then you need to check the groung. Try disconnecting the ground and see what happens. You gotta have a short somewhere. Also noticed your a newb. Check your stingers and make sure they are proper length no more than a 1/8 inch extended past the fitting. I have seen them cause shorts also. What your describing a splitter or kinked wire. If you have to run your finger down the last three runs and double check your lines making sure there are no kinks. Replace your fittings agian.

About a month ago I had that same problem I ended up replacing the fittings four times on both ends. Dont know why. I can only guess that the fittings somewhere somehow were bad.

Let us know what you find and what the fix is.
This is CABL.com posting #140283. Tiny Link: cabl.co/mKEN
Posted in reply to: d-10 by CompuSAT
There are 0 replies to this message