Re: Return Noise
Member #: 3359
Registered: 1996-2001
Posted:
1285
Name:
Andy Lamarre
Name:
Andy Lamarre
Company:
Catv Expert
Occupation:
Dir.
Location:
Montreal, Quebec, Canada
Personal:
Ancient
Experience:
~66 years
My $ 00.2 worth. Any noise below 20 dB below any return carrier should be looked at. As a 17 dB C/N or better is needded for QPSK modulation on the return path and 19 dB C.N or better is needded for 16 QAM. Electrical noise usually goes from 5 to about 16 to 18 MHz. Above these frequency CPD or other type of noise should be removed ASAP.
There are 0 replies to this message
