Two MB Sprinter vans with EVERYTHING!
Idaho
$200,000.00
Bank transfer, cash.
20 Pictures
Description
2019 MB Sprinter 3500 w/ 25000 miles and a 2013 MB Sprinter 3500 w/100k. Both are fully insulated, paneled, and outfitted with Adrian Steel cabinets. Both vans have Onan 5k Quiet Diesels for power, and Dometic 13k air conditioners. Lots of LED lights inside, strobes outside, and LED downlights. The 2013 has a Whelen traffic director mounted above the rear doors. The 2013 also has an air compressor and air dryer for copper work. Vans also have stereo speakers and subwoofers for "morale purposes..."
In addition to the vehicles, included are all the fusion splicers, OTDR's, hand tools, - these are ready to go to work now!
Including:
2 x Fujikura 90s splicers
2 x Fujikura 70S splicers
2 x Fujikura 41S splicers
2 x Fujikura 50R ribbon splicers, upgraded with new thermal strippers
4 x EXFO OTDR's - One Max 730, One Max 720, One FTB1, and One FTB-200v2 with 7300 and 3932 test unit
3 x EXFO 930 units (work with the 3932 unit in the OTDR...)
4 x EXFO LFD201 Traffic ID units
2 x EXFO LFD300 Traffic ID units for jumpers
4 x EXFO FLS-300 light sources
2 x EXFO FPM-300 power meters
2 x Leister heat guns
3 x Draka tube shavers
2 x Corning fiber splitters
3 x Corning Ribbonizers
OFS and Jonard tube slitters
Handtools for in the van work, and another set for pedestals/building work. LOTS of hand tools.
2 x Pelsue blowers and hoses.
2 x Pelsue 6x6 ground tents
1 x Pelsue 8x8 ground tent
2 x Pelsue inline propane heaters
2 x Prosser 110v manhole pumps with 50' and 2-25' hoses in each van.
GMP manhole lid lifters and handhole lid lifters
2 x Jameson Stubby LED lights
3 x MSA 4 gas, gas detectors and a bottle of test gas.
ALSO: A large amount of left-over Commscope cases, trays, and fuse sleeves (both single and ribbon)
ALSO: Enough copper tools to outfit two splicers, to include MS2 and 310 heads, separate hand tools, and test equipment.
This is everything needed to get splicing. Nothing is broken - I wouldn't sell it if it was.
In addition to the vehicles, included are all the fusion splicers, OTDR's, hand tools, - these are ready to go to work now!
Including:
2 x Fujikura 90s splicers
2 x Fujikura 70S splicers
2 x Fujikura 41S splicers
2 x Fujikura 50R ribbon splicers, upgraded with new thermal strippers
4 x EXFO OTDR's - One Max 730, One Max 720, One FTB1, and One FTB-200v2 with 7300 and 3932 test unit
3 x EXFO 930 units (work with the 3932 unit in the OTDR...)
4 x EXFO LFD201 Traffic ID units
2 x EXFO LFD300 Traffic ID units for jumpers
4 x EXFO FLS-300 light sources
2 x EXFO FPM-300 power meters
2 x Leister heat guns
3 x Draka tube shavers
2 x Corning fiber splitters
3 x Corning Ribbonizers
OFS and Jonard tube slitters
Handtools for in the van work, and another set for pedestals/building work. LOTS of hand tools.
2 x Pelsue blowers and hoses.
2 x Pelsue 6x6 ground tents
1 x Pelsue 8x8 ground tent
2 x Pelsue inline propane heaters
2 x Prosser 110v manhole pumps with 50' and 2-25' hoses in each van.
GMP manhole lid lifters and handhole lid lifters
2 x Jameson Stubby LED lights
3 x MSA 4 gas, gas detectors and a bottle of test gas.
ALSO: A large amount of left-over Commscope cases, trays, and fuse sleeves (both single and ribbon)
ALSO: Enough copper tools to outfit two splicers, to include MS2 and 310 heads, separate hand tools, and test equipment.
This is everything needed to get splicing. Nothing is broken - I wouldn't sell it if it was.
Contact
Text John @ 208-407-2384, that way you won't just go to voicemail.
Please Login to use the Contact form.
listed •
expires
classified listing #10370 •
tiny link cabl.co/ccRq
