Cell Site Installers
Full-time Employee
Arizona, Florida, Pennsylvania, Texas
Starts
Upon successful application process
Pay
Discussed during interview
Qualifications
Certifications:
· RF Awareness
· OSHA 10
· CPR
Job Description
Wiseconnect Inc is seeking Cell Site Installers
Job Description:
(A) Perform all applicable construction, installation, and decommissioning in accordance with the Construction Drawings and Standards and Requirements.
(B) Keep the site clean, orderly, and free of debris while providing construction, installation, and decommissioning L2L Services.
(C) Install conduit to the fiber provider's ROW/utility easement meet-me point to the MMBTS cabinet and fiber from the MMBTS to the fiber backhaul demarcation point in cabinet.
(D) Remove all trash and debris from the site upon completion of the construction, installation, and decommissioning services.
(E) Provide red-line markups of the Construction Drawings, noting any changes and completing closeout package.
Basic Conduit Installation:
(A) Fiber Path 1: MMP to Telco Demarcation with (Wye-Intercept)
Install new PVC conduit to existing AAV's backhaul conduit along with innerduct conduit & pull string inside the new PVC, not to exceed 20 feet.
Install wye intercept to existing AAV backhaul conduit
· Hand Trench/Dig
· Locate and open existing conduit
· Install couplers
· Rod existing conduit to include pull string and pull box
· Back fill
· Restoration
(B) Fiber Path 2: Telco Demarcation to NID
Install Pull String
(C) Fiber Path 3: NID to MMBTS
Install fiber not to exceed 50 feet and terminate at both ends
- Identify underground utility locations before installing conduit;
- Ensure pull string is available in conduit and each inner duct;
- Install a conduit to the building rooftop room (inner floor rise) from ROW/Utility easement meet-me point
Certifications:
· RF Awareness
· OSHA 10
· CPR
Power Services:
Power Path: Install -48V power from power plant/PPC to existing relay rack/H-Frame/Telco Cabinet for the new AAV router along with one (1) breaker and 8AWG wire in existing conduit not to exceed 50 feet.
Job Description:
(A) Perform all applicable construction, installation, and decommissioning in accordance with the Construction Drawings and Standards and Requirements.
(B) Keep the site clean, orderly, and free of debris while providing construction, installation, and decommissioning L2L Services.
(C) Install conduit to the fiber provider's ROW/utility easement meet-me point to the MMBTS cabinet and fiber from the MMBTS to the fiber backhaul demarcation point in cabinet.
(D) Remove all trash and debris from the site upon completion of the construction, installation, and decommissioning services.
(E) Provide red-line markups of the Construction Drawings, noting any changes and completing closeout package.
Basic Conduit Installation:
(A) Fiber Path 1: MMP to Telco Demarcation with (Wye-Intercept)
Install new PVC conduit to existing AAV's backhaul conduit along with innerduct conduit & pull string inside the new PVC, not to exceed 20 feet.
Install wye intercept to existing AAV backhaul conduit
· Hand Trench/Dig
· Locate and open existing conduit
· Install couplers
· Rod existing conduit to include pull string and pull box
· Back fill
· Restoration
(B) Fiber Path 2: Telco Demarcation to NID
Install Pull String
(C) Fiber Path 3: NID to MMBTS
Install fiber not to exceed 50 feet and terminate at both ends
- Identify underground utility locations before installing conduit;
- Ensure pull string is available in conduit and each inner duct;
- Install a conduit to the building rooftop room (inner floor rise) from ROW/Utility easement meet-me point
Certifications:
· RF Awareness
· OSHA 10
· CPR
Power Services:
Power Path: Install -48V power from power plant/PPC to existing relay rack/H-Frame/Telco Cabinet for the new AAV router along with one (1) breaker and 8AWG wire in existing conduit not to exceed 50 feet.
Contact
x x x x Canceled/Expired Listing x x x x
listed •
expires
job listing #70990 •
tiny link cabl.co/esDa